Which cities is the Kolmo permit lookup verified for?

Ten cities: Seattle, Bellevue, Kirkland, Redmond, Sammamish, Issaquah, Renton, Kent, Federal Way, and Mercer Island. For these, every fee, threshold, and timeline is sourced from the city directly with the exact quote and URL, and re-verified weekly. Outside these ten cities address lookup still works and we render the parcel and Washington-state baseline code, but per-city specifics are flagged as unverified.

Does the lookup cover unincorporated King, Pierce, or Snohomish County?

Address lookup works and parcels resolve to the county building department, but unincorporated coverage is currently baseline-only — Washington-state IRC, IBC, and WSEC plus state critical-area rules. Per-county fee and code deviations have not been verified to the same standard as the ten verified cities.

Will this replace calling the permit center?

For most homeowner projects — decks, kitchens, bathrooms, ADUs, fences, siding, windows, flooring, roofing, HVAC, electrical, plumbing — the published answer matches what the permit center will say, and the homeowner can submit with a pre-filled application packet. For variances, conditional uses, or unusual scope, calling the city planner is still recommended.

Where does the address go after submission?

The address is geocoded via Google Maps to identify the correct county, then queried against public county GIS endpoints. Parcel data is cached for 30 days. The address is not contacted, sold, or shared with third parties.

Who built this — and why?

Built by Kolmo Construction, a licensed Seattle-area general contractor. The team works with permit code daily and built this to fix the public web's poor coverage of homeowner permit questions. The lookup is free; if a homeowner wants a contractor for the project, Kolmo is one option.

Siding permits in City of Redmond: fees, timeline & requirements (2026)

Everything you need to know about pulling a siding permit in City of Redmond, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Redmond uses ePlans portal..

Permit required?

Often no

Permit fee

Typically minimal fee — like-for-like usually exempt. Apply via https://eplans.redmond.gov. Redmond uses ePlans portal.

Review timeline

—

When does a siding need a permit in City of Redmond?

2021 IRC R105.2(1)(g) exempts "ordinary repairs" — like-for-like siding replacement on existing structure. Permit required if changing structural sheathing, adding insulation that affects WSEC compliance, or modifying weather-resistive barrier (WRB) detailing.

Required submittals

if permit required: WRB + flashing details, fastener schedule, WSEC continuous insulation calc if added

Inspection sequence

WRB / flashing inspection
final

Contractor specialties needed

general

Notes & caveats

WRB required behind all siding (IRC R703.2). Flashing at openings, kick-out flashings at roof-wall intersections (R703.4) inspected when permit issued.

How to apply

1. Confirm your parcel's zoning & overlays. Run an address lookup on the main permits page — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
2. Assemble submittals (1).
3. Submit through the city portal: Redmond uses ePlans portal. ↗
4. Track review (typical: —). Respond to reviewer comments promptly.
5. Pay issuance fees (Typically minimal fee — like-for-like usually exempt. Apply via https://eplans.redmond.gov. Redmond uses ePlans portal.) and pick up the permit. Inspection card travels with the job.

Compare this against other cities

Side-by-side siding requirements across all 10 verified Seattle-area cities.

All City of Redmond permits

Every project type — ADU, addition, kitchen, bath, deck, fence, and more — for City of Redmond.

City of Redmond resourcesPermit portal ↗Fee schedule ↗