Stormwater permits in Shoreline: fees, timeline & requirements (2026)

Everything you need to know about pulling a stormwater / drainage permit in Shoreline, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Shoreline Planning & Community Development.

Look up your Shoreline address

Free lookup, no account needed — your lot polygon, zoning, setbacks and overlays, cited to Shoreline's source.

Permit required?
Always
Permit fee
Shoreline bills a clearing and grading permit at its $267 hourly rate with a 3-hour minimum.
Review timeline
Not published by the city

When does drainage work need a permit in Shoreline?

Ecology's Stormwater Management Manual for Western Washington (SWMMWW, 2024 edition) is the state floor. A municipal stormwater permittee may instead adopt a regional manual Ecology has determined equivalent, and most do — some counties publish their own, some cities publish their own, and others adopt Ecology's directly. Which manual applies is a per-jurisdiction fact and it changes the numbers: review thresholds for new plus replaced impervious surface and for land-disturbing activity differ between manuals, so read this jurisdiction's own adopting chapter before quoting one. Critical-area and closed-basin parcels get stricter review under every manual.

From Shoreline's own code

“A. The city adopts by reference the Stormwater Management Manual for Western Washington published by Washington State Department of Ecology, henceforth referred to as “Stormwater Manual.” The effective version shall be the most recent version that has been approved for city use by the director. All new development, redevelopment, and other activities which have the potential to impact surface water and stormwater shall comply with the standards set forth in the current effective version of the following unless specifically exempted by the Stormwater Manual: 1. Stormwater Manual; 2.”
Source ↗verified 2026-05-17

Required submittals

  • Drainage report (full or simplified)
  • Site plan with impervious calc
  • BMP / facility detail
  • Geotech if infiltration claimed

Inspection sequence

  1. Pre-construction (BMPs in place)
  2. Facility installation
  3. Final stabilization

Contractor specialties needed

General contractor

Who can do this work in Shoreline?

Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout Shoreline and King County. Kolmo prepares the drawings and submittals, files the stormwater / drainage permit with Shoreline Planning & Community Development, carries the project through review and inspections, and performs the construction. Call (206) 410-5100 for a Shoreline stormwater / drainage quote.

Notes & caveats

Surface Water Report required when ≥2,000 sq ft new/replaced hard surface — follows EDM Appendix C. SWPPP Short Form usable when <5,000 sq ft hard surface and <7,000 sq ft disturbance; otherwise Ecology template required. Declaration of Covenant – Stormwater Facilities required when project proposes on-site stormwater facilities (EDM Ch. 4.9). CSWGP via WA DOE may be required for larger sites.

How to apply yourself

  1. 1. Confirm your parcel's zoning & overlays. Run an address lookup for your drainage work in Shoreline — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline, critical-area or historic overlays.
  2. 2. Assemble submittals: the 4 documents under Required submittals above.
  3. 3. Submit through the city portal: Shoreline Planning & Community Development ↗
  4. 4. Track review. Respond to reviewer comments promptly.
  5. 5. Pay issuance fees (Shoreline's fee schedule sets them) and pick up the permit. Inspection card travels with the job.

Or have Kolmo do it

Kolmo prepares the drawings and submittals, files with Shoreline Planning & Community Development, handles reviewer comments, and builds the project.

(206) 410-5100

Licensed WA general contractor KOLMOL*753JS · bonded & insured

Stormwater permits in Shoreline — FAQ

When does drainage work need a permit in Shoreline?

Ecology's Stormwater Management Manual for Western Washington (SWMMWW, 2024 edition) is the state floor. A municipal stormwater permittee may instead adopt a REGIONAL manual Ecology has determined equivalent, and most do — some counties publish their own, some cities publish their own, and others adopt Ecology's directly. WHICH MANUAL APPLIES IS A PER-JURISDICTION FACT and it changes the numbers: review thresholds for new plus replaced impervious surface and for land-disturbing activity differ between manuals, so read this jurisdiction's own adopting chapter before quoting one. Critical-area and closed-basin parcels get stricter review under every manual.

How much does a stormwater / drainage permit cost in Shoreline?

Shoreline bills a clearing and grading permit at its $267 hourly rate with a 3-hour minimum. The grading inspection fee, by the sum of cut and fill, is $267 for 50 to 500 cubic yards without a drainage conveyance, $570 with one, and $1,140 for 501 to 5,000 cubic yards. Residential civil (drainage) plan review, where it applies, has a 4-hour minimum, or 1 hour up to 1,000 square feet. A 4% technology surcharge is added to the City's permit fees (SMC FEE.010). Apply electronically via eTRAKiT (https://www.shorelinewa.gov/government/departments/planning-community-development/permit-center-remote-services/register-for-a-professional-etrakit-account).