Electrical permits in City of Bellevue: fees, timeline & requirements (2026)
Everything you need to know about pulling a electrical permit in City of Bellevue, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Bellevue Development Services.
When does a electrical need a permit in City of Bellevue?
A permit is required for adding or moving electrical circuits and for changes to the service panel. Bellevue issues its own electrical permits (not WA L&I); permits without plan review can issue same day but still require inspection.
From City of Bellevue's own page
“A permit is required for adding or moving electrical circuits and for changes to the service panel.”Source ↗verified 2026-06-26
Required submittals
- scope description
- load calc for service changes
- panel schedule for new panels
Inspection sequence
- rough-in
- service inspection (if applicable)
- final
Contractor specialties needed
electrical-01-or-02
Notes & caveats
Service upgrade: load calc per NEC 220. EV charger ≥40A: dedicated circuit + GFCI. AFCI required on most habitable-space circuits (NEC 210.12). Permit holder must hold L&I electrical contractor license (specialty 01 — general; 02 — residential ≤4 units; 03 — pump & irrigation; etc.).
Electrical permit fee estimate in City of Bellevue
Worked example for a $6,000 electrical project (electrical permit). Your actual fee scales with project valuation.
| Building permit fee | $250 |
| Plan review | $162.5 |
| WA state surcharge | $4.5 |
| Estimated total | $417 |
L&I permit fees by circuit count + service size. Standard residential ~$60-$200. Apply via https://mybuildingpermit.com. Computed from the City of Bellevue fee bracket schedule · source ↗. Impact/utility fees may apply separately.
How to apply
- 1. Confirm your parcel's zoning & overlays. Run an address lookup for your City of Bellevue electrical — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
- 2. Assemble submittals (3).
- 3. Submit through the city portal: Bellevue Development Services ↗
- 4. Track review (typical: —). Respond to reviewer comments promptly.
- 5. Pay issuance fees (L&I permit fees by circuit count + service size. Standard residential ~$60-$200. Apply via https://mybuildingpermit.com.) and pick up the permit. Inspection card travels with the job.
Electrical permits in City of Bellevue — FAQ
When does a electrical need a permit in City of Bellevue?
A permit is required for adding or moving electrical circuits and for changes to the service panel. Bellevue issues its own electrical permits (not WA L&I); permits without plan review can issue same day but still require inspection.
How much does a electrical permit cost in City of Bellevue?
For a $6,000 electrical project, the estimated City of Bellevue permit fee is about $417 — building fee $250 + plan review $162.5 + surcharges. Fees scale with project valuation per the city schedule.