Siding permits in Bellevue: fees, timeline & requirements (2026)
Everything you need to know about pulling a siding permit in Bellevue, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Bellevue Development Services.
Free lookup, no account needed — your lot polygon, zoning, setbacks and overlays, cited to Bellevue's source.
When does siding replacement need a permit in Bellevue?
Siding replacement does not require a permit, except for stucco and brick or stone veneer greater than 4 feet above the grade plane.
In the source's own words
“A permit is not required for the replacement of siding, except for stucco and brick or stone veneer greater than four feet above the grade plane.”Source ↗verified 2026-05-29
Required submittals
- If permit required: WRB + flashing details, fastener schedule, WSEC continuous insulation calc if added
Inspection sequence
- WRB / flashing inspection
- Final
Contractor specialties needed
General contractor
Who can do this work in Bellevue?
Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout Bellevue and King County. Kolmo prepares the drawings and submittals, files the siding permit with Bellevue Development Services, carries the project through review and inspections, and performs the construction. Call (206) 410-5100 for a Bellevue siding quote.
Notes & caveats
WRB required behind all siding (IRC R703.2). Flashing at openings, kick-out flashings at roof-wall intersections (R703.4) inspected when permit issued.
Siding permit fee estimate in Bellevue
Worked example for an $18,000 siding project (building permit). Your actual fee scales with project valuation.
| Building permit fee | $549.45 |
| Plan review | $357.14 |
| WA state surcharge | $6.50 |
| Estimated total | $913.09 |
Where siding work needs a permit in Bellevue, it is a building permit priced on the value of the work: $44 up to $500, $44 plus $6.39 for each $100 more up to $2,000, $139.85 for the first $2,000 plus $25.60 for each $1,000 more up to $25,000, and $728.65 for the first $25,000 plus $19.06 for each $1,000 more up to $50,000, each prorated. Where the plans are reviewed, plan review adds 65% of that fee; the operations fee is $53, or $21 when the permit is issued over the counter (Ordinance 6879), and the state building code fee is $6.50 on a residential permit (RCW 19.27.085). Apply via mybuildingpermit.com. Computed from Bellevue's adopted fee schedule · source ↗. Land use, fire and engineering review, intake, impact and utility fees, where they apply, are charged separately.
How to apply yourself
- 1. Confirm your parcel's zoning & overlays. Run an address lookup for your Bellevue siding — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
- 2. Assemble submittals (1).
- 3. Submit through the city portal: Bellevue Development Services ↗
- 4. Track review. Respond to reviewer comments promptly.
- 5. Pay issuance fees (about $913 for an $18,000 project) and pick up the permit. Inspection card travels with the job.
Or have Kolmo do it
Kolmo prepares the drawings and submittals, files with Bellevue Development Services, handles reviewer comments, and builds the project.
Licensed WA general contractor KOLMOL*753JS · bonded & insured
Siding permits in Bellevue — FAQ
When does siding replacement need a permit in Bellevue?
Siding replacement does not require a permit, except for stucco and brick or stone veneer greater than 4 feet above the grade plane.
How much does a siding permit cost in Bellevue?
For a $18,000 siding project, the estimated Bellevue permit fee is about $913.09 (building fee $549.45 + plan review $357.14 + surcharges) from Bellevue's adopted fee schedule. Land use, fire and engineering review, intake, impact and utility fees, where they apply, are charged separately.