Siding permits in City of Everett: fees, timeline & requirements (2026)

Everything you need to know about pulling a siding permit in City of Everett, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Everett Planning Department.

Look up your City of Everett address

Free lookup, no account needed — your lot polygon, zoning, setbacks and overlays, cited to City of Everett's source.

Permit required?
Always
Permit fee
Treated as a residential building permit at minimum valuation. WA Building Code Council surcharge $6.50. Confirm exact fee at intake — Everett charges off the project valuation.
Review timeline
1–10 days · OTC eligible

When does a siding need a permit in City of Everett?

Everett does not list siding among permit-exempt work in its official one- and two-unit-dwelling exemptions handout (rev. 10/07/2025). Re-roofs — the closest envelope analog — are explicitly listed as requiring a permit. Treat all residential siding work as permit-required unless Permit Services confirms otherwise in writing for the specific scope.

How City of Everett adopted this rule

The threshold comes from the state code (WAC 51.51), which City of Everett adopts by reference in the provision quoted below.

“A. Amendments applicable to adopted codes: 1. Any reference to the “Everett building code,” “Everett mechanical code,” “Everett fire code,” “Everett plumbing code,” “Everett electrical code,” and “Everett energy code,” in the Everett Municipal Code or elsewhere, refers to the corresponding code adopted pursuant to Section 16.005.030 . 2. Unless the context requires otherwise, any reference to a code adopted pursuant to Section 16.005.030 refers to that code as adopted herein. 3.”
Source ↗verified 2026-05-14

Required submittals

  • scope description (full re-side vs. partial; existing siding type → new siding type)
  • WRB + flashing details (manufacturer or generic)
  • fastener schedule for new siding system
  • WSEC continuous-insulation calc if adding insulation board over sheathing
  • structural sheathing replacement scope (if any)

Inspection sequence

  1. WRB / flashing inspection
  2. final

Contractor specialties needed

general

Who can do this work in City of Everett?

Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout City of Everett and Snohomish County. Kolmo prepares the drawings and submittals, files the siding permit with Everett Planning Department, carries the project through review and inspections, and performs the construction. Call (206) 410-5100 for a City of Everett siding quote.

Notes & caveats

Permit issued by Everett Permit Services (3200 Cedar St; [email protected]; 425.257.8810). WRB required behind all siding (IRC R703.2). Flashing at openings + kick-out flashings at roof-wall intersections (IRC R703.4) inspected. WSEC continuous-insulation upgrade may be triggered if structural sheathing is exposed during the work.

Siding permit fee — Washington baseline, not City of Everett's own schedule

Worked example for a $18,000 siding project (building permit). Your actual fee scales with project valuation.

Building permit fee$293.25
Plan review$190.61
WA state surcharge$6.5
Estimated total$490.36

Treated as a residential building permit at minimum valuation. WA Building Code Council surcharge $6.50. Confirm exact fee at intake — Everett charges off the project valuation. We have not read City of Everett's adopted fee schedule, so this is not City of Everett's fee: it walks the standard valuation table most Washington cities adopt by reference, as a rough guide. The real numbers are in City of Everett's fee schedule ↗. Impact/utility fees may apply separately.

How to apply yourself

  1. 1. Confirm your parcel's zoning & overlays. Run an address lookup for your City of Everett siding — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
  2. 2. Assemble submittals (5).
  3. 3. Submit through the city portal: Everett Planning Department ↗
  4. 4. Track review (typical: 1–10 days). Respond to reviewer comments promptly.
  5. 5. Pay issuance fees (Treated as a residential building permit at minimum valuation. WA Building Code Council surcharge $6.50. Confirm exact fee at intake — Everett charges off the project valuation.) and pick up the permit. Inspection card travels with the job.

Or have Kolmo do it

We pull siding permits in City of Everett every month. We prepare the drawings and submittals, file with Everett Planning Department, handle reviewer comments, and build the project.

(206) 410-5100

Licensed WA general contractor KOLMOL*753JS · bonded & insured

Siding permits in City of Everett — FAQ

When does a siding need a permit in City of Everett?

Everett does not list siding among permit-exempt work in its official one- and two-unit-dwelling exemptions handout (rev. 10/07/2025). Re-roofs — the closest envelope analog — are explicitly listed as requiring a permit. Treat all residential siding work as permit-required unless Permit Services confirms otherwise in writing for the specific scope.

How much does a siding permit cost in City of Everett?

For a $18,000 siding project, the estimated City of Everett permit fee is about $490.36 — building fee $293.25 + plan review $190.61 + surcharges. Fees scale with project valuation per the city schedule.

How long does City of Everett take to review a siding permit?

Typical review window: 1–10 days. Over-the-counter eligible for some scopes.

City of Everett resourcesPermit portal ↗Fee schedule ↗