Which cities is the Kolmo permit lookup verified for?

Ten cities: Seattle, Bellevue, Kirkland, Redmond, Sammamish, Issaquah, Renton, Kent, Federal Way, and Mercer Island. For these, every fee, threshold, and timeline is sourced from the city directly with the exact quote, URL, and the date Kolmo sourced it; an automated scanner monitors the source pages daily for drift. Outside these ten cities address lookup still works and we render the parcel and Washington-state baseline code, but per-city specifics are flagged as unverified.

Does the lookup cover unincorporated King, Pierce, or Snohomish County?

Address lookup works and parcels resolve to the county building department, but unincorporated coverage is currently baseline-only — Washington-state IRC, IBC, and WSEC plus state critical-area rules. Per-county fee and code deviations have not been verified to the same standard as the ten verified cities.

Will this replace calling the permit center?

For most homeowner projects — decks, kitchens, bathrooms, ADUs, fences, siding, windows, flooring, roofing, HVAC, electrical, plumbing — the published answer matches what the permit center will say, and the homeowner can submit with a pre-filled application packet. For variances, conditional uses, or unusual scope, calling the city planner is still recommended.

Where does the address go after submission?

The address is geocoded via Google Maps to identify the correct county, then queried against public county GIS endpoints. Parcel data is cached for 30 days. The address is not contacted, sold, or shared with third parties.

Who built this — and why?

Built by Kolmo Construction, a licensed Seattle-area general contractor. The team works with permit code daily and built this to fix the public web's poor coverage of homeowner permit questions. The lookup is free; if a homeowner wants a contractor for the project, Kolmo is one option.

Fence permits in City of Issaquah: fees, timeline & requirements (2026)

Everything you need to know about pulling a fence permit in City of Issaquah, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Community Planning & Development.

Permit required?

Often no

Permit fee

Typically no fee unless permit required. Apply via https://mybuildingpermit.com.

Review timeline

— · OTC eligible

When does a fence need a permit in City of Issaquah?

Fences are exempt up to 6 feet (Tip Sheet 0); a permit is required over 6 feet, in a critical area, or for a fence with an additional 2 feet of lattice on top. Maximum height is 4 feet in the front setback and 6 feet in side/rear setbacks.

From City of Issaquah's own page

“The maximum height in the front setback is 4 feet. The maximum height in the side and rear setbacks is 6 feet.”
Source ↗verified 2026-06-26

Required submittals

site plan w/ heights and setbacks (if permit required)

Inspection sequence

final (if permit required)

Contractor specialties needed

general

Notes & caveats

Sight-distance triangle requirements at intersections + driveways (city zoning code). Setback requirements vary by zone.

Fence permit fee estimate in City of Issaquah

Worked example for a $6,000 fence project (building permit). Your actual fee scales with project valuation.

Building permit fee	$125.25
Plan review	$81.41
WA state surcharge	$4.5
Estimated total	$211.16

Typically no fee unless permit required. Apply via https://mybuildingpermit.com. Computed from the City of Issaquah fee bracket schedule · source ↗. Impact/utility fees may apply separately.

How to apply

1. Confirm your parcel's zoning & overlays. Run an address lookup for your City of Issaquah fence — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
2. Assemble submittals (1).
3. Submit through the city portal: Community Planning & Development ↗
4. Track review (typical: —). Respond to reviewer comments promptly.
5. Pay issuance fees (Typically no fee unless permit required. Apply via https://mybuildingpermit.com.) and pick up the permit. Inspection card travels with the job.

Compare this against other cities

Side-by-side fence requirements across all 10 verified Seattle-area cities.

All City of Issaquah permits

Every project type — ADU, addition, kitchen, bath, deck, fence, and more — for City of Issaquah.

Fence permits in City of Issaquah — FAQ

When does a fence need a permit in City of Issaquah?

How much does a fence permit cost in City of Issaquah?

For a $6,000 fence project, the estimated City of Issaquah permit fee is about $211.16 — building fee $125.25 + plan review $81.41 + surcharges. Fees scale with project valuation per the city schedule.

City of Issaquah resourcesPermit portal ↗Fee schedule ↗