Electrical permits in Kent: fees, timeline & requirements (2026)
Everything you need to know about pulling an electrical permit in Kent, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to WA L&I.
Free lookup, no account needed — the office that issues the permit at your address, cited to Kent's source.
When does electrical work need a permit in Kent?
Altering an electrical system requires a permit, but Kent does not issue residential electrical permits — those are issued and inspected by Washington State Labor & Industries.
In the source's own words
“Altering a electrical, gas, mechanical or plumbing system.”Source ↗verified 2026-05-29
Required submittals
- Scope description
- Load calc for service changes
- Panel schedule for new panels
Inspection sequence
- Rough-in
- Service inspection (if applicable)
- Final
Contractor specialties needed
Electrician (journey-level 01 or residential 02)
Who can do this work in Kent?
Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout Kent and King County. Kolmo manages the electrical job from start to finish: a licensed electrical contractor performs the work and the permit, and Kolmo coordinates the scope, schedule, inspections and any related construction. Call (206) 410-5100 for a Kent electrical quote.
Notes & caveats
Service upgrade: load calc per NEC 220. EV charger ≥40A: dedicated circuit + GFCI. AFCI required on most habitable-space circuits (NEC 210.12). Permit holder must hold L&I electrical contractor license (specialty 01 — general; 02 — residential ≤4 units; 03 — pump & irrigation; etc.).
How to apply yourself
- 1. Check who issues the permit. Run an address lookup for your electrical work in Kent — we'll confirm which office issues the permit at that address.
- 2. Assemble submittals: the 3 documents under Required submittals above.
- 3. Apply with WA L&I.
- 4. Track review. Respond to reviewer comments promptly.
- 5. Pay issuance fees (WA L&I sets them) and pick up the permit. Inspection card travels with the job.
Or have Kolmo do it
Kolmo runs the job: a licensed electrical contractor does the electrical work and pulls the permit, and Kolmo coordinates the scope, schedule, inspections and any related construction.
Licensed WA general contractor KOLMOL*753JS · bonded & insured
Electrical permits in Kent — FAQ
When does electrical work need a permit in Kent?
Altering an electrical system requires a permit, but Kent does not issue residential electrical permits — those are issued and inspected by Washington State Labor & Industries.
How much does an electrical permit cost in Kent?
Kent charges no electrical permit fee: L&I issues electrical permits in Kent and sets and collects their fees. Apply and request inspections through L&I (https://lni.wa.gov/licensing-permits/electrical/electrical-basics-for-home-business-owners/electrical-permit-basics).