Which cities is the Kolmo permit lookup verified for?

Ten cities: Seattle, Bellevue, Kirkland, Redmond, Sammamish, Issaquah, Renton, Kent, Federal Way, and Mercer Island. For these, every fee, threshold, and timeline is sourced from the city directly with the exact quote, URL, and the date Kolmo sourced it; an automated scanner monitors the source pages daily for drift. Outside these ten cities address lookup still works and we render the parcel and Washington-state baseline code, but per-city specifics are flagged as unverified.

Does the lookup cover unincorporated King, Pierce, or Snohomish County?

Address lookup works and parcels resolve to the county building department, but unincorporated coverage is currently baseline-only — Washington-state IRC, IBC, and WSEC plus state critical-area rules. Per-county fee and code deviations have not been verified to the same standard as the ten verified cities.

Will this replace calling the permit center?

For most homeowner projects — decks, kitchens, bathrooms, ADUs, fences, siding, windows, flooring, roofing, HVAC, electrical, plumbing — the published answer matches what the permit center will say, and the homeowner can submit with a pre-filled application packet. For variances, conditional uses, or unusual scope, calling the city planner is still recommended.

Where does the address go after submission?

The address is geocoded via Google Maps to identify the correct county, then queried against public county GIS endpoints. Parcel data is cached for 30 days. The address is not contacted, sold, or shared with third parties.

Who built this — and why?

Built by Kolmo Construction, a licensed Seattle-area general contractor. The team works with permit code daily and built this to fix the public web's poor coverage of homeowner permit questions. The lookup is free; if a homeowner wants a contractor for the project, Kolmo is one option.

Flooring permits in City of Kent: fees, timeline & requirements (2026)

Everything you need to know about pulling a flooring permit in City of Kent, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Kent uses MyKent permits portal..

Permit required?

Often no

Permit fee

No permit fee for surface flooring. Apply via https://mybuildingpermit.com.

Review timeline

—

When does a flooring need a permit in City of Kent?

Tiling or carpeting is a cosmetic improvement that does not need a permit.

From City of Kent's own page

“Painting, papering, tiling, carpeting, cabinets, counter tops and similar finish work.”
Source ↗verified 2026-05-29

Contractor specialties needed

general

Notes & caveats

Radiant in-floor heat is a mechanical permit (electric) or plumbing permit (hydronic).

Flooring permit fee estimate in City of Kent

Worked example for a $6,000 flooring project (building permit). Your actual fee scales with project valuation.

Building permit fee	$125.25
Plan review	$81.41
WA state surcharge	$4.5
Estimated total	$211.16

No permit fee for surface flooring. Apply via https://mybuildingpermit.com. Computed from the City of Kent fee bracket schedule · source ↗. Impact/utility fees may apply separately.

How to apply

1. Confirm your parcel's zoning & overlays. Run an address lookup for your City of Kent flooring — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
2. Assemble submittals (site plan, scope-of-work, photos).
3. Submit through the city portal: Kent uses MyKent permits portal. ↗
4. Track review (typical: —). Respond to reviewer comments promptly.
5. Pay issuance fees (No permit fee for surface flooring. Apply via https://mybuildingpermit.com.) and pick up the permit. Inspection card travels with the job.

Compare this against other cities

Side-by-side flooring requirements across all 10 verified Seattle-area cities.

All City of Kent permits

Every project type — ADU, addition, kitchen, bath, deck, fence, and more — for City of Kent.

Flooring permits in City of Kent — FAQ

When does a flooring need a permit in City of Kent?

Tiling or carpeting is a cosmetic improvement that does not need a permit.

How much does a flooring permit cost in City of Kent?

For a $6,000 flooring project, the estimated City of Kent permit fee is about $211.16 — building fee $125.25 + plan review $81.41 + surcharges. Fees scale with project valuation per the city schedule.

City of Kent resourcesPermit portal ↗Fee schedule ↗