Roofing permits in City of Kent: fees, timeline & requirements (2026)
Everything you need to know about pulling a roofing / re-roof permit in City of Kent, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Kent uses MyKent permits portal..
Permit required?
Yes — see threshold below
Permit fee
Flat fee or valuation-based. Typically $150-$400 for residential. Apply via https://kentwa.gov/permits. Kent uses MyKent permits portal.
Review timeline
— · OTC eligible
When does a roofing / re-roof need a permit in City of Kent?
2021 IRC R907 requires permit for re-roofing. Many WA cities require a re-roof permit even for simple tear-off + replace because of underlayment, ice/water shield, and ventilation inspection. Some allow over-the-counter.
Required submittals
- scope description
- manufacturer underlayment + flashing details
Inspection sequence
- mid-roof / underlayment
- final
Contractor specialties needed
general
Notes & caveats
Underlayment per R905. Ice/water shield required (most WA climate zones) at eaves + valleys (R905.1.2). Cool-roof / WSEC R-value of insulation may be triggered if removing decking.
How to apply
- 1. Confirm your parcel's zoning & overlays. Run an address lookup on the main permits page — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
- 2. Assemble submittals (2).
- 3. Submit through the city portal: Kent uses MyKent permits portal. ↗
- 4. Track review (typical: —). Respond to reviewer comments promptly.
- 5. Pay issuance fees (Flat fee or valuation-based. Typically $150-$400 for residential. Apply via https://kentwa.gov/permits. Kent uses MyKent permits portal.) and pick up the permit. Inspection card travels with the job.