Siding permits in City of Kent: fees, timeline & requirements (2026)
Everything you need to know about pulling a siding permit in City of Kent, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Kent uses MyKent permits portal..
Permit required?
Often no
Permit fee
Typically minimal fee — like-for-like usually exempt. Apply via https://kentwa.gov/permits. Kent uses MyKent permits portal.
Review timeline
—
When does a siding need a permit in City of Kent?
2021 IRC R105.2(1)(g) exempts "ordinary repairs" — like-for-like siding replacement on existing structure. Permit required if changing structural sheathing, adding insulation that affects WSEC compliance, or modifying weather-resistive barrier (WRB) detailing.
Required submittals
- if permit required: WRB + flashing details, fastener schedule, WSEC continuous insulation calc if added
Inspection sequence
- WRB / flashing inspection
- final
Contractor specialties needed
general
Notes & caveats
WRB required behind all siding (IRC R703.2). Flashing at openings, kick-out flashings at roof-wall intersections (R703.4) inspected when permit issued.
How to apply
- 1. Confirm your parcel's zoning & overlays. Run an address lookup on the main permits page — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline/ECA/historic overlays.
- 2. Assemble submittals (1).
- 3. Submit through the city portal: Kent uses MyKent permits portal. ↗
- 4. Track review (typical: —). Respond to reviewer comments promptly.
- 5. Pay issuance fees (Typically minimal fee — like-for-like usually exempt. Apply via https://kentwa.gov/permits. Kent uses MyKent permits portal.) and pick up the permit. Inspection card travels with the job.