Electrical permits in Lynnwood: fees, timeline & requirements (2026)
Everything you need to know about pulling an electrical permit in Lynnwood, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Lynnwood Development & Business Services.
Free lookup, no account needed — the office that issues the permit at your address, cited to Lynnwood's source.
When does electrical work need a permit in Lynnwood?
Lynnwood issues its own electrical permits — through the City's Development & Business Services, not WA L&I. The City's Electrical Permits page: "The City of Lynnwood issues Electrical Permits and conducts inspections for work done within Lynnwood City Limits." and "An electrical permit is required for most electrical work and ensures your installation conforms to safety codes and standards." Lynnwood adopts "the Washington State adopted National Electrical Code (NEC)" (LMC 16.10.050) and sets electrical permit fees by city fee ordinance (LMC 16.10.090); the chapter's own exempt-work section, LMC 16.10.065, is repealed. The City's "Electrical Permit Exemptions" handout (Building Permit Series, 2024.06) lists the "work which does not require a permit per the Lynnwood Municipal Code, RCW 19.28, WAC 296.46B, NEC and TIA/EIA standards": like-in-kind replacement of a circuit breaker, dimmer, fuse, heating element, household appliance, lamp, luminaire ballast with an exact same ballast, receptacle outlet, residential luminaire, snap switch, thermostat, motor of ten horsepower or smaller, control component (contactor, relay, timer, starter, circuit board), or sign and outline-lighting components where the system is not modified; induction gate-control loops; heat cable repair; listed heat mats embedded in tile grout; telecommunications installations inside single-family, duplex and multifamily dwelling units; cord-and-plug telecommunications equipment; and travel trailers. It does not cover replacing a whole unit, assembly or enclosure that contains an exempt component, such as an electric furnace or heat pump.
In the source's own words
“The City of Lynnwood issues Electrical Permits and conducts inspections for work done within Lynnwood City Limits.”Source ↗verified 2026-09-25
What Lynnwood says in its own permit handout
From Electrical Checklist, published by Lynnwood. This is the jurisdiction's own guidance on its permit process, not the ordinance text — where the two differ, the code governs.
“Property owners MUST use a licensed electrical contractor to perform electrical work on the property they own if the property will be offered for sale, rented or leased within 12 months of completing the work.”Checklist ↗read 2026-09-05
Required submittals
- Scope description
- Load calc for service changes
- Panel schedule for new panels
Inspection sequence
- Rough-in
- Service inspection (if applicable)
- Final
Contractor specialties needed
Electrician (journey-level 01 or residential 02)
Who can do this work in Lynnwood?
Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout Lynnwood and Snohomish County. Kolmo manages the electrical job from start to finish: a licensed electrical contractor performs the work and pulls the permit, and Kolmo coordinates the scope, schedule, inspections and any related construction. Call (206) 410-5100 for a Lynnwood electrical quote.
Notes & caveats
The City's page adds: "Electrical Permits must be applied for by a licensed contractor." Apply and request inspections online through the City's permit portal (lynnwoodwa.gov/
How to apply yourself
- 1. Check who issues the permit. Run an address lookup for your electrical work in Lynnwood — we'll confirm which office issues the permit at that address.
- 2. Assemble submittals: the 3 documents under Required submittals above.
- 3. Submit through the city portal: Lynnwood Development & Business Services ↗
- 4. Track review. Respond to reviewer comments promptly.
- 5. Pay issuance fees (Lynnwood's fee schedule sets them) and pick up the permit. Inspection card travels with the job.
Or have Kolmo do it
Kolmo runs the job: a licensed electrical contractor does the electrical work and pulls the permit, and Kolmo coordinates the scope, schedule, inspections and any related construction.
Licensed WA general contractor KOLMOL*753JS · bonded & insured
Electrical permits in Lynnwood — FAQ
When does electrical work need a permit in Lynnwood?
Lynnwood issues its own electrical permits — through the City's Development & Business Services, not WA L&I. The City's Electrical Permits page: "The City of Lynnwood issues Electrical Permits and conducts inspections for work done within Lynnwood City Limits." and "An electrical permit is required for most electrical work and ensures your installation conforms to safety codes and standards." Lynnwood adopts "the Washington State adopted National Electrical Code (NEC)" (LMC 16.10.050) and sets electrical permit fees by city fee ordinance (LMC 16.10.090); the chapter's own exempt-work section, LMC 16.10.065, is repealed. The City's "Electrical Permit Exemptions" handout (Building Permit Series, 2024.06) lists the "work which does not require a permit per the Lynnwood Municipal Code, RCW 19.28, WAC 296.46B, NEC and TIA/EIA standards": like-in-kind replacement of a circuit breaker, dimmer, fuse, heating element, household appliance, lamp, luminaire ballast with an exact same ballast, receptacle outlet, residential luminaire, snap switch, thermostat, motor of ten horsepower or smaller, control component (contactor, relay, timer, starter, circuit board), or sign and outline-lighting components where the system is not modified; induction gate-control loops; heat cable repair; listed heat mats embedded in tile grout; telecommunications installations inside single-family, duplex and multifamily dwelling units; cord-and-plug telecommunications equipment; and travel trailers. It does not cover replacing a whole unit, assembly or enclosure that contains an exempt component, such as an electric furnace or heat pump.
How much does an electrical permit cost in Lynnwood?
Lynnwood issues its own electrical permits, not L&I. On a house, adding or altering up to 10 circuits with no service change is $147, and $15 for each more circuit up to a $200 total; altering or changing a service or panel is $147 plus $15 for each added circuit, up to $200. A transfer switch panel and residential generator is $87, low voltage systems $102, and a service or panel for a garage or other accessory building $256. New construction is priced on the electrical valuation table, $114 up to $1,000 and $114 plus $12.62 for each $1,000 more up to $5,000. A 2.5% technology fee is added (LMC 3.104).