Fence permits in Puyallup: fees, timeline & requirements (2026)
Everything you need to know about pulling a fence permit in Puyallup, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Puyallup Development & Permitting Services.
Free lookup, no account needed — your lot polygon, zoning, setbacks and overlays, cited to Puyallup's source.
When does a fence need a permit in Puyallup?
2021 IRC R105.2(1)(d) exempts fences ≤7ft high. Cities frequently extend (Seattle: 8ft) or require permits for fences in critical areas, flood zones, or with masonry components.
From Puyallup's own code
“Except as regulated under subsection (11) of this section, and as regulated in PMC 20.58.005(2), fences and walls constructed shall not exceed a maximum height above the adjacent grade as set forth in this subsection: (a) Fences and walls located within 20 feet of a front lot line shall not exceed a height of three and one-half feet, except that open-wire, weldedwire, chain-link, split-rail or similar fences may be as tall as five feet in height. (b) Fences and walls located within the rear yard or interior side yard shall not exceed a total height of six feet.”Source ↗verified 2026-09-07
What Puyallup says in its own permit handout
From Fences (dated 8/2025), published by Puyallup. This is the jurisdiction's own guidance on its permit process, not the ordinance text — where the two differ, the code governs.
“Fence Height Limits within Required Setbacks … Front yards: Max 3.5 ft. within 20 ft. of the front lot line, unless the fence is open-style (e.g., chain link or split rail), in which case a max 5 ft tall fence may be constructed.”Handout ↗read 2026-09-05
Required submittals
- Site plan w/ heights and setbacks (if permit required)
Inspection sequence
- Final (if permit required)
Contractor specialties needed
General contractor
Who can do this work in Puyallup?
Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout Puyallup and Pierce County. Kolmo prepares the drawings and submittals, files the fence permit with Puyallup Development & Permitting Services, carries the project through review and inspections, and performs the construction. Call (206) 410-5100 for a Puyallup fence quote.
Notes & caveats
Sight-distance triangle requirements at intersections + driveways (city zoning code). Setback requirements vary by zone.
Fence permit fee estimate in Puyallup
Worked example for a $6,000 fence project (building permit). Your actual fee scales with project valuation.
| Building permit fee | $125.25 |
| Plan review | $81.41 |
| WA state surcharge | $6.50 |
| Estimated total | $213.16 |
A fence that needs a building permit in Puyallup is priced on the value of the work: $25 up to $500, $25 for the first $500 plus $3.05 for each $100 more up to $2,000, and $69.25 for the first $2,000 plus $14 for each $1,000 more up to $25,000 (2026 Municipal Fee Schedule). Apply through Puyallup's online permit system, CityView (permits.puyallupwa.gov/
How to apply yourself
- 1. Confirm your parcel's zoning & overlays. Run an address lookup for your fence in Puyallup — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline, critical-area or historic overlays.
- 2. Assemble submittals: what Required submittals above lists.
- 3. Submit through the city portal: Puyallup Development & Permitting Services ↗
- 4. Track review. Respond to reviewer comments promptly.
- 5. Pay issuance fees (about $213 for a $6,000 project) and pick up the permit. Inspection card travels with the job.
Or have Kolmo do it
Kolmo prepares the drawings and submittals, files with Puyallup Development & Permitting Services, handles reviewer comments, and builds the project.
Licensed WA general contractor KOLMOL*753JS · bonded & insured
Fence permits in Puyallup — FAQ
When does a fence need a permit in Puyallup?
2021 IRC R105.2(1)(d) exempts fences ≤7ft high. Cities frequently extend (Seattle: 8ft) or require permits for fences in critical areas, flood zones, or with masonry components.
How much does a fence permit cost in Puyallup?
For a $6,000 fence project, the estimated Puyallup permit fee is about $213.16 (building fee $125.25 + plan review $81.41 + surcharges) from Puyallup's adopted fee schedule. Land use, fire and engineering review, intake, impact and utility fees, where they apply, are charged separately.