Fence permits in Redmond: fees, timeline & requirements (2026)
Everything you need to know about pulling a fence permit in Redmond, Washington — when one is required, what it costs, how long review takes, what documents are required, and which inspections you can expect. Cited to Redmond Planning and Community Development.
Free lookup, no account needed — your lot polygon, zoning, setbacks and overlays, cited to Redmond's source.
When does a fence need a permit in Redmond?
A permit is required for a fence over 7 feet in height; fences 7 feet and under are exempt (the Work Exempt handout confirms "Fences not over 7 feet (2,134 mm) high"). Property lines and sight-distance must be observed.
In the source's own words
“A permit is required for construction of a fence if over 7 feet in height. Property lines shall be adhered to when constructing a fence.”Source ↗verified 2026-05-29
Required submittals
- Site plan w/ heights and setbacks (if permit required)
Inspection sequence
- Final (if permit required)
Contractor specialties needed
General contractor
Who can do this work in Redmond?
Kolmo Construction is a licensed Washington general contractor — KOLMOL*753JS, active through April 10, 2027, bonded and insured — working throughout Redmond and King County. Kolmo prepares the drawings and submittals, files the fence permit with Redmond Planning and Community Development, carries the project through review and inspections, and performs the construction. Call (206) 410-5100 for a Redmond fence quote.
Notes & caveats
Sight-distance triangle requirements at intersections + driveways (city zoning code). Setback requirements vary by zone.
Fence permit fee estimate in Redmond
Worked example for a $6,000 fence project (building permit). Your actual fee scales with project valuation.
| Building permit fee | $249.86 |
| Plan review | $162.41 |
| Technology surcharge | $16.49 |
| WA state surcharge | $6.50 |
| Estimated total | $435.26 |
A fence over 7 feet needs a building permit in Redmond, priced on the value of the work: $46.89 up to $500, $46.89 for the first $500 plus $6.08 for each $100 more up to $2,000, and $138.26 for the first $2,000 plus $27.90 for each $1,000 more up to $25,000; plan review is 65% of that fee. A 4% technology surcharge applies to the total, plus the $6.50 state building code fee (2026 fee schedules). Apply through the Redmond ePermitting Service, REPS (cityofredmondwa-energovweb.tylerhost.net/
How to apply yourself
- 1. Confirm your parcel's zoning & overlays. Run an address lookup for your fence in Redmond — we'll pull your specific lot polygon, zoning, setbacks, and any shoreline, critical-area or historic overlays.
- 2. Assemble submittals: what Required submittals above lists.
- 3. Submit through the city portal: Redmond Planning and Community Development ↗
- 4. Track review. Respond to reviewer comments promptly.
- 5. Pay issuance fees (about $435 for a $6,000 project) and pick up the permit. Inspection card travels with the job.
Or have Kolmo do it
Kolmo prepares the drawings and submittals, files with Redmond Planning and Community Development, handles reviewer comments, and builds the project.
Licensed WA general contractor KOLMOL*753JS · bonded & insured
Fence permits in Redmond — FAQ
When does a fence need a permit in Redmond?
A permit is required for a fence over 7 feet in height; fences 7 feet and under are exempt (the Work Exempt handout confirms "Fences not over 7 feet (2,134 mm) high"). Property lines and sight-distance must be observed.
How much does a fence permit cost in Redmond?
For a $6,000 fence project, the estimated Redmond permit fee is about $435.26 (building fee $249.86 + plan review $162.41 + surcharges) from Redmond's adopted fee schedule. Land use, fire and engineering review, intake, impact and utility fees, where they apply, are charged separately.