Detached ADU (DADU) Permits in Kent
A standalone backyard cottage with its own foundation, roof, and exterior. Maximum flexibility on layout; highest construction cost. State law bars a city maximum below 1,000 sq ft of gross floor area, except on lots with critical areas (RCW 36.70A.681).
Free lookup: your lot’s zoning and setbacks, with a detached ADU placed on it to move and turn.
Permit fees in Kent
Set by the Kent fee schedule.
Kent fee scheduleKent charges no separate land use fee for an ADU; it is priced with its building permit, on the value of the work: $881.32 for the first $25,000 plus $22.75 for each $1,000 more up to $50,000, $1,450.35 for the first $50,000 plus $15.78 for each $1,000 more up to $100,000, and $2,238.81 for the first $100,000 plus $12.64 for each $1,000 more up to $500,000. Intake fees are billed once the submittal is complete, and the rest before the permit issues. The plumbing and mechanical permits are priced separately, and the City's posted fee documents (its 2026 building permit fee table and land use fees) list neither, so the Permit Center (253-856-5300) quotes them. Electrical permits come from L&I, at L&I's fees. The traffic impact fee schedule the City posts (effective 2025) charges none for a lot's first ADU and $3,054.63 citywide for a second or later one. Apply through the City of Kent Permit Portal (sso.kentwa.gov).
Review timeline
Not published by Kent.
What Kent asks for with a detached ADU
Every application (23)
- ADU permit application (Kent Planning Services)
- Residential building permit application (Kent permitting portal)
- Legal description of the property (King County)
- Water and sewer availability certificates, from the lot's utility purveyors
- Notice of Shared Utilities, recorded (where the ADU shares the house's utilities)
- King County Residential Sewer Use Certification (capacity charge)
- Fire flow form, from the water purveyor
- Fire Impact Fee Information Sheet
The other 15
- Site plan
- Roof downspout infiltration trench (Kent Standard Plan 5-26), on the site plan
- Foundation plan
- Floor plan
- Roof plan
- Roof + floor framing plan
- Typical building / wall section
- Building elevations N/S/E/W
- Glazing + door schedule (NFRC U-factor / SHGC)
- Structural design notes (loads, materials, inspections)
- Major materials schedule
- Structural calculations, stamped by a Washington licensed engineer
- WSEC energy compliance, on the plans
- WSEC-R forms (WSU Energy Program), in the drawings
- Plan sheets 24×36 or larger, landscape, with space reserved for City approval stamps
Where the lot or the work calls for it
Where the lot has a steep slope
- Soils report by a Washington licensed geotechnical engineer
Where the lot is in a flood zone
- Flood-resistant construction to IRC R322 (designated flood area)
From the city’s own documents: City of Kent — Accessory Dwelling Unit Permit Checklist (9/27/24) · City of Kent — Residential Building Permits · City of Kent — King County Residential Sewer Use Certification (Sewage Treatment Capacity Charge) · City of Kent — New Residences and Additions Checklist (4/26), last read October 21, 2026. An address’s own page checks its lot for slopes, flood zones and critical areas.
